Controller with switch-off function (current measuring controller)
The desired maximum load = switch-off current for single or double-running cylinders, as well as Taurus, can be set using the potentiometers on the back of the controller.
The controller’s LED indicates when the controller switches off.
The cylinders switch off automatically in end positions or when the desired load is reached.
It is equipped with a brake that stops the cylinder immediately, even under high load, and also ensures that “further pressing” is not possible when the cylinder is at a standstill (handbrake).
The motor can then only start again after the transmitter stops the motor or
controls it in the other direction
Can also be used for applications in which a motor without a limit switch is to be switched off in end positions.
Operating voltage: 12 volts (10 NiMh cells or 3 Lipo)
Dimensions: 17×17.5×5.5 mm
Battery and motor connection: 0.25qmm silicone cable
